Commercial Clear Sealers
For professional use only, Life Deck Commercial clear sealers are top of the line coatings form high traffic areas.
CLEAR COATINGS BUILT FOR HIGH TRAFFIC APPLICATIONS IN THE COMMERCIAL MARKET.
Life Specialty Coatings manufactures a large variety of durable and long lasting commercial clear sealers. The chemical composition per each coating ranges greatly for intended use. Many of the commercial sealers come in a variety of sheens including high gloss, gloss, semi-gloss, and satin finish. Commercial Life Deck sealers, depending on each chemical composition, have differing qualities and strengths. They resist strong chemicals, UV rays, have excellent gloss retention, impact resistance and excellent abrasion resistance.
Life Deck commercial sealers can be used for applications resist hot-tire pick up, pool chemicals, laboratory chemicals, urine, skydrol, and many other common damaging chemicals. Commercial clear sealers also have excellent scratch resistance. For specific coating attributes, please explore each data sheet for specific qualifications. Please contact Life Specialty Coatings directly for product recommendations or 1 on 1 coating consultation.
LD-2114 GLOSS | LD-2116 SATIN | URETHANE 1K-SINGLE COMPONENT SEALER
Overview: Life Deck Single Component Aliphatic Urethane Sealer is designed for commercial applications. These coatings are a premium quality crystal clear urethane that provides a tough, durable surface for floors requiring urethane flexibility, UV resistance and protection, chemical resistance and superior adhesion.
Advantages: Designed for commercial applications, abrasion resistance, stain resistance, repels oil, grease, water, easy to use, safe for use over acrylics, chemical resistant, non-yellowing, UV Resistant, and fast drying in an easy to use water based formula.
Recommended Substrates: For commercial interior and exterior surfaces. May be applied over Life Deck Waterproofing Systems and Life Deck Concrete Resurfacing Systems. Other acceptable substrates include concrete floors, warehouses, factories and more.
2110 GLOSS | 2112 SATIN | URETHANE 2K-WATER BASED ALIPHATIC SEALER
Overview: Life Deck Two Component Aliphatic Urethane Sealer is a premium quality crystal clear urethane that provides a tough, durable surface for floors requiring urethane flexibility, UV resistance and protection, chemical resistance, and superior adhesion. Use this product when high chemical resistance and durability is needed.
Advantages: Abrasion resistant, stain resistant, repels oil, grease resistant, chemical resistant, easy to use, water based, non-yellowing, UV resistant, and fast drying with an easy application and 24 hour pot life.
Uses: For interior and exterior surfaces. May be applied over Life Deck Waterproofing Systems and Life Deck Concrete Resurfacing Systems. Perfect for use over concrete flooring, large patios, brick walls, wood, walkways with high traffic, pavers and more.
LD7530 | HIGH GLOSS ALIPHATIC URETHANE
Overview: Designed for commercial applications, LD7530 is a single component aliphatic moisture cure urethane designed as a UV resistant and mar resistant finish coat for cementitious floors and floor coating systems. Life Deck aliphatic urethane is extremely high gloss and UV resistant. This single-component (1K) aliphatic coating cures rapidly in the presence of atmospheric moisture. It forms films that are light stable, abrasion resistant and exhibit good chemical resistance. It is typically used for exterior applications over Life Deck cements and stains. It is not recommended for application over acrylic pigmented sealers.
Advantages: Superior UV resistance, VOC Compliant, chemical resistant, excellent color and gloss retention, impact & abrasion resistant, versatile application- spray, roll, brush or sponge.
Applications: Concrete floors, overlays, stone, storage tanks, milling & mining areas, steel structures, bridges, power generating plants, food processing facilities and more.
LD-1325 | NATURAL LOOK SEALER - NO FILM COMMERCIAL SILICONE
Overview: Life’s Concrete Masonry Sealer is a clear penetrating water repellent for use on porous concrete or other masonry surfaces designed for commercial applications. It will create a natural look providing invisible water protection over the substrate. 1325 contains no wax.
Use: This concrete sealer may be applied to above grade concrete and masonry blocks, cement block, stucco, walls, stones, grout, porous tiles, inside or outside, new or old unpainted surfaces. It acts as a hydrophobic water repellent.
Advantages: Fast drying, water based formulation, deep penetrating, invisible protection, easy to use, low odor. It is used to close out the capillaries in the cement and is a type of hydrophobic coating.
25-96 | CLEAR WATER BASED EPOXY 3:1 RATIO
Overview: Clear water based epoxy is a high gloss, premium quality, two-part water based epoxy coating that provides epoxy toughness, chemical resistance and durability with the convenience of an eco-friendly system, fast drying and long pot life.
Recommended Surfaces: For interior use only unless protected by another product with a UV inhibitor such as our aliphatic urethane. Uses include industrial floors in factories, restaurant kitchens, schools, hospitals, food processing, garage floors, dairies and warehouses. It can used as a clear sealer for interior concrete floors, garages, warehouses, restaurants, industrial floors, showrooms, kitchens and many more. It can also be used after a grind and seal application.
Advantages: Easy water clean-up, fast drying, excellent chemical and solvent resistance, long pot life and more.
LD2003 | CLEAR LIFE DECK CHEMICAL-RESISTANT URETHANE
Overview: The LD CRU 2003 is a two component aliphatic polyester polyurethane designed as UV resistant, mar resistant and chemical resistant finish coats for cementitious floors and floor coating systems. Life Deck CRU is over 100 g/l VOC and may have residential usage restrictions in your air district. Chemical Resistant Urethane is extremely tough and has high scratch resistance, chemical resistance and UV resistance.
Applications: Concrete floors, petrochemical plants, aircraft hangars, milling & mining areas, steel structures & bridges, food processing facilities, water treatment plants, kennels, pool decks (for extreme chlorine situations).
Advantages: Superior UV resistance, superior chemical resistant, excellent gloss retention, superior impact & abrasion resistance.
31-96 | CLEAR SOLVENT-BASED 100% SOLIDS EPOXY
Overview: Life Deck epoxy interior flooring system is a clear, 2 component (2K), low odor, low viscosity 100% solids product for use as a high-build system. This system is typically used on seamless industrial floors in combination with ceramic colored quartz, paint chips, decorative toppings, or metallic finishes where a high-build finish is required. 100% clear epoxy is often used for decorative epoxy systems for high strength, strong chemical resistance and more.
- Exhibits low viscosity, good color stability, excellent gloss and chemical resistance.
- Intended for curing at room temperature but curing may also take place at relatively low temperatures and under high humidity conditions.
- Excellent non-blushing characteristics.
LD9600 | Water-Based CRU
Overview: LD9600 Water-Based CRU is a two component, high solids, water base, aliphatic polyurethane. The excellent UV resistant, mar resistant, chemical resistant nature of this product will cause it to outperform most other types of sealers or topcoats without the unwanted smell of solvents. Available in two options: high gloss finish (LD9600) & satin finish (LD9600S).
Uses: LD9600 WB CRU is designed for professional use only and is specified as the finish coat for use in moderate to severe chemical environments or in medium to heavy traffic areas. This U.V. resistant coating can be used in both indoor and outdoor applications. Apply LD9600 WB CRU as a coating over Life Specialty Coatings water base and 100% solids epoxy floor coatings. WB CRU is also used as a sealer on a variety of other substrates such as decorative concrete overlays and acid stained concrete flooring. Use LD9600 WB CRU on garage floors, decorative floors, restaurant floors, and food processing facilities.
LD-2008 | "WET LOOK" STONE GLAZE SOLVENATED ACRYLIC LACQUER
Overview: Life Deck 2008 is a clear, high gloss “Wet Look” solvent based acrylic sealer and glaze. It is a very hard acrylic polymer that offers good gloss, UV resistance and stain resistance compared to most other sealers. For an additional upgrade to the solvenated acrylic lacquer, please see 7530 aliphatic urethane below for a more durable and UV resistant alternative. LD2008 is not recommended for applications over acrylic color sealers.
Advantages: Stone Glaze, or Life Deck “Wet Look” sealer, is designed to seal and create a “wet look” on concrete, unglazed brick, tiles and many other masonry surfaces. Perfect to seal and glaze stamped concrete and cementitious surfaces such as textured overlays with Life Deck Color Wash or 20 series stain. Stone Glaze has been used on many commercial and residential properties all throughout the United States including Las Vegas casinos, amusement parks and more.