If a plywood deck starts to feel spongy underfoot, or a stain spreads across the ceiling below it, the cause is often water that found a way through the wearing surface and reached the plywood substrate. At that point, a waterproof deck coating for plywood can be part of the fix, provided the plywood is still sound. Understanding why these decks fail, and what a properly built system is made of, helps a contractor or building manager know what to ask for before signing off on a scope of work.
Why Plywood Decks Fail
Seams and Fastener Penetrations
A plywood seam can become a water path if it isn’t sealed and reinforced before coating is applied. Movement at an unreinforced seam can eventually crack the finish.
Wall to Deck Transitions and Flashing
Sheet metal flashing, lapped and sealed at the wall and fascia, protects that transition.
Slope and Drainage
A deck that doesn’t shed water toward a drain or edge can leave water standing at a seam or a thin spot in the coating. A sufficient slope should be set in the framing before any coating goes down.
What a Plywood Deck Waterproofing System Is Made Of
Lath and Reinforcement
A reinforced system starts with lath, typically hot-dipped galvanized metal lath stapled to the plywood, with a fiber lath mesh added over the base coat on some systems. The lath reinforces the cementitious base coat, and lath-reinforced systems are designed to eliminate plywood seams.
Cementitious Base and Slurry Coats
Over the lath goes a cement and acrylic base coat, troweled smooth, with a brush used to work it into the flashing and seams, followed by a slurry coat of the same mix. On systems built for extra flexibility, a chopped fiberglass mat or fiber lath mesh is laid over the cured base coat and saturated with a flexible waterproofing resin before the remaining coats go on.
Texture and Color Top Coats
The final layers are an optional sprayed texture coat of cement and acrylic and two rolled coats of acrylic color sealer, which provide texture, color, and UV resistance with an anti-skid finish.
System Types for Plywood Decks
Reinforced systems generally fall into three categories, and picking the right waterproof deck coating for plywood often depends on expected deck movement and traffic load:
- Metal lath systems. Two cementitious coats, a base coat and a slurry coat, go over hot-dipped galvanized metal lath for high-traffic walking decks.
- Fiberglass reinforced flexible systems. Metal lath plus embedded fiberglass suits new construction where soft soil or settling calls for added crack resistance.
- Combination reinforced systems. Metal lath and a separate fiber lath layer work together in extra heavy traffic settings like high-rise balconies and corridors.
Code Considerations for Walking Decks
Fire Classification
Some reinforced plywood systems carry a Class A fire rating under ASTM E108, with a 1-hour rating tied to specific tested assemblies, so it’s worth confirming which system a fire rating covers before it goes on a submittal.
Code Reports and Listings
An ICC-ES evaluation report is what a code official or specifier wants to see: It lists the code editions covered, the properties evaluated (durability, wind resistance, fire classification, and fire resistance), and the AC39 walking deck data submitted. Walking deck systems should also carry approval from independent third-party testing laboratories, like QAI.
Recoating an Existing Deck Versus Full Removal
An aging deck coating doesn’t always mean tearing down to bare plywood. If the substrate is sound, a new reinforced system can often be stapled over the prepared existing deck system, but plywood that water has damaged should be replaced first.
Maintenance That Extends Service Life
Cleaning with a dry soft-bristled broom or mop helps retain the deck’s appearance, and damage should be patched as soon as it’s noticed.
Choosing the Right Deck System for Your Plywood Deck
Life Specialty Coatings’ plywood systems follow the same logic covered above: lath reinforcement, a cementitious base, and a top coat, with the reinforcement matched to the traffic and movement the deck will see. The result is a waterproof deck coating for plywood that is detailed at the seams and the flashing, not just across the flat field of the deck.
Read our deck coating selection guide to match a system to your deck, or request an installation observation from a Life Specialty Coatings rep.