Life Deck Specialty Coatings 15 Series | Textured Color Seal
Premium Skid-Resistant Textured color seal
Overview: The Life Deck Specialty Coatings 15 Series is a textured premium, quick drying, 100% acrylic concrete/masonry pigmented sealer formulated for sealing concrete and masonry, and coating wood, to provide resistance against water, alkalis, acids, ultraviolet light and staining. It contains a small additional aggregate to increase slip resistance.
Advantages: Fast drying, water based, easy water clean-up, chemical resistant, alkali resistant, moisture resistant, UV resistant, excellent hide and color retention, passes ASTM D 2047-82, slip resistance, resistant to ponding water.
Uses: Ramps, standard top coat for all Life Deck waterproofing systems excluding LD 2000 and Auto-Life, concrete floors, pool decks, wood decks, patios, ADA compliant applications, stairs, pool decks and walkways, deck reseals, deck reconstruction, standard deck coating installations.
- RESOURCES
Coming Soon!
Why to use Life Deck Texture Skid Resistant Coating:
Life Deck “15” is a skid resistant coating containing thousands of anti-slip particles to provide traction on walking surfaces. Designed to be used as an anti-skid top coat for the Life Deck “FM Fiber Mat,” Life Deck MC walking deck system, or Life Deck AL waterproof deck system. Life Deck Texture Coat can also be used as a single coat finish.
Finish options for life deck texture skid resistant coating:
slip resistant low sheen
Package Size for life deck texture skid resistant coating:
- Quarts
- Gallons
- 5 Gallons
Color Options for life deck texture skid resistant coating:
- -00 White
- -41 New Cape Cod Gray
How to prepare the surface for life deck texture finish coating:
Important tip: Concrete, concrete decks, floors and walk ways New concrete must age for a minimum of 30 days. Cool temperatures and high humidity may require a longer cure time.
- Remove all grease, oil and wax with T. S. P. Solution. (One pound of T. S. P. to 1 gallon of water.) Scrub with stiff broom until surface is thoroughly clean.
- Rinse thoroughly with clear water. Then etch all unpainted cement with 1 part 10% muriatic acid to 1 part water. Allow to stand 10-15 minutes then rinse clean with water.
- A properly etched concrete surface should resemble the texture grit of medium sand paper. Let dry thoroughly before applying coating.
Do not use life deck texture finish over mildew:
Mildew is a fungus, brown, black, grey or even white in color, and will rapidly grow through any coating applied over it. A solution of 50% household bleach and 50% water will kill the mildew. Rinse thoroughly. See precautions on bleach label for handling before using.
How to prime life deck texture finish:
For best results prime all surfaces with 1575 Life Deck Primer before applying top coat
How to prime a previously painted surfaces for life deck texture coat:
Clean all surfaces and roughen all glossy surfaces by sanding. Remove all peeling, loose or blistered paint by scraping and wire brushing. Remove all chlorinated rubber and hydrocarbon finishes by sandblasting. Clean all surfaces thoroughly with a T.S.P solution and then rinse thoroughly with water.
How to prep a sloshy surface with life deck texture coat:
Roughen gloss by sanding; then wash with a T . S.P . solution and rinse thoroughly with water .
Unpainted Surfaces: Prime all surfaces, edges, as well as undersides if possible. Caulk all cracks and nail holes.
Metal: Clean and etch all new metal. Prime all bare metal.
Coverage: Life Deck 15 Series may be rolled, brushed or sprayed and the coverage will vary. Up to 300 square feet per gallon on a smooth surface and between 200-300 square feet per gallon on a rough surface. Product may be thinned slightly with a small amount of water, in which case 2 coats are recommended.
How to apply life deck texture non-slip finish:
Box and mix all containers to insure consistent color. Neatly cut-in all edges with a brush and roll the main area using a 1/2″ to 3/4″ nap, good quality roller cover. Be sure to spread evenly in a “V” pattern, rolling in both directions. It is best not to apply in the hot sun or above 80 degrees. Thinning slightly with water and applying thin coats will help avoid streaks in direct sun.
Drying Time for life deck texture non-slip surface:
Allow four (4) hours between coats and light foot traffic. Normal foot traffic after twenty- four (24) hours. Allow vehicle traffic after seven days. Allow forty-eight (48) hours before placing heavy objects on the surface.
Clean-up for life deck texture non-slip surface:
Warm water and soap.
Temperature and weather conditions for life deck texture application:
Do not install any Life Deck product if the temperature is below 55 degrees. Rain may damage uncured Life Deck products. If inclement weather threatens, cover deck to protect new application. Do not allow any Life Deck product to freeze.
Maintenance for a textured finish deck for long lasting effects:
Most Stains will clean-up with TSP, a brush, and water. We recommend a re-coat every 2- 5 years, depending on traffic and exposure to the sun.
Repairs to a life deck texture deck: Repairs may be done by grinding off the damaged area and replacing the material as written in this information guide.
- Applications
- Applications
- Standard Top Coat for All Life Deck Product Waterproofing Systems Excluding LD 2000.
- Concrete Floors
- Pool Decks
- Wood Decks
- Patios
- Advantages
- Advantages
- Fast Drying
- Water Based- Easy Water Clean-Up
- Chemical, Alkali, and Moisture Resistant
- UV Resistant
- Excellent Hide and Color Retention
- Passes ASTM D 2047-82, Slip Resistance
- Resistant to Ponding Water
Recommended Systems
SOLUTIONS:
Balcony Decks, Stairways, Patio Covers, Corridors, Landings, High-Pedestrian Traffic, Roof Decks, Walkways & Walking Decks
INDUSTRIES:
Community Planning, Educational Institutions, Parks & Recreation, Retail Stores / Outlets, Hospitality, Commercial Office
SOLUTIONS:
Balcony Decks, Stairways, Patio Covers, Corridors, Landings, High-Pedestrian Traffic, Roof Decks, Walkways & Walking Decks
INDUSTRIES:
Community Planning, Educational Institutions, Parks & Recreation, Retail Stores / Outlets, Hospitality, Commercial Office
SOLUTIONS:
Balcony Decks, Stairways, Patio Covers, Corridors, Landings, High-Pedestrian Traffic, Roof Decks, Walkways & Walking Decks
INDUSTRIES:
Community Planning, Hospitality, Commercial Office
SOLUTIONS:
Balcony Decks, Stairways, Patio Covers, Corridors, Pool Decks, Gazebos
INDUSTRIES:
Community Planning, Parks & Recreation, Hospitality
SOLUTIONS:
Balcony Decks, Breezeways, Stairways, Patio Covers, Corridors, Landings, High-Pedestrian Traffic, Roof Decks, Above-Ground Pool Decks, Walkways & Walking Decks
INDUSTRIES:
Community Planning, Educational Institutions, Retail Stores / Outlets, Hospitality, Commercial Office